Output Cover Assembly Removal (Model X658) - Lexmark 7462 series Service Manual

Output cover assembly removal (model X658)

1
Open the rear door assembly.
2
Lift the right side of the fuser exit access panel and remove.
Printhead assembly removal
Warning—Potential Damage: When replacing the printhead assembly, ensure that the printhead skew is
properly adjusted, or print quality issues will occur. Go to
1
Remove the laser cover. Go to
page 325 or "Laser cover removal (model X658)" on page
2
Remove the six screws (A) securing the metal cover to the machine.
3
Remove the metal cover.
"Laser cover removal (models X651, X652, X654, and X656)" on
A A
Repair information
"Alignment assembly adjustment" on page
327.
377
7462
305.