Lexmark 7462 series Service Manual page 127

Error code Description
245.66 Pick motor underspeed error (tray 5)
The pick motor does not rotate at the specified
speed.
245.67 Pick motor overspeed error (tray 5)
The pick motor does not rotate at the specified
speed.
245.68 Pick motor stop error (tray 5)
Pick motor stop error detected by options tray x.
245.69 Pick motor control failure (tray 5)
The pick motor does not reach the proper
operating speed at the specified time.
Tray area jam service check
Action
Step 1
Remove all media present in media path.
Does the problem remain?
Step 2
Properly reinstall media.
Does the problem remain?
Step 3
Remove obstructions in the media path.
Does the problem remain?
Sensor (pass through) lingering jam service check
Action
Step 1
Replace the media or change the media size setup in all the trays.
Does the problem remain?
Step 2
Remove obstructions in the media tray pass through areas.
Does the problem remain?
Action
Go to "Tray pick motor control failure service
check" on page
Diagnostic information
127
130.
Yes No
Go to step 2. Problem is solved.
Go to step 3. Problem is solved.
Contact next level of Problem is solved.
support.
Yes No
Go to step 2. The problem is
solved.
Go to step 3. The problem is
solved.
7462