Event Log - Lexmark 7462 series Service Manual

Touch Back to return to the Configuration menu.

EVENT LOG

Display Log
This event log lists the 12 most recent errors that have occurred on the printer. The most recent error appears
in position 1, and the oldest error appears in position 12. If an error occurs after the log is full, the oldest error
is discarded. Identical errors in consecutive positions in the log are entered.
Note: All 2xx and 9xx error messages are stored in the event log.
1
From the Diagnostics menu, navigate to EVENT LOG > Display Log.
Note: Only three error codes appear at a time.
2
Depending on your printer model, touch Back or press the Back button to return to EVENT LOG.
Print Log
Additional diagnostic information is available when this event log is printed. The specific events that appear in
the report vary depending on the operational history of the printer. Logs may include the following:
•
Detailed printer information, including code versions
•
Time and date stamps
•
Page counts for most errors
•
Additional debug information in some cases
1
From the Diagnostics menu, navigate to EVENT LOG > Print Log.
Note: You can fax this event log to Lexmark or to your next level of support for verification or diagnosis.
2
Depending on your printer model, touch Back or press the Back button to return to EVENT LOG.
Clear Log
This allows you to remove all the current information in the event log. This affects both the viewed and printed
log information.
1
From the Diagnostics menu, navigate to EVENT LOG > Clear Log.
2
Select Yes.
Note: Deleting EVENT LOG appears on the display.
SCANNER TESTS
Back Side Scan Uniformity
This procedure should be run after the ADF has been replaced. Before proceeding, make sure that the scanner
glass and backing material are clean.
Service menus
277
7462