High Capacity Input Tray (Hcit) Anti-Tip Latch Assembly Removal - Lexmark 7462 series Service Manual

3
Remove the HCIT cover, left.

High capacity input tray (HCIT) anti-tip latch assembly removal

Note: Carefully remove the base machine from the HCIT tray assembly before proceeding. The left and right
anti-tip latch assemblies are the same, and only one is in a package. The instructions below are for removing
the left latch; removing the right latch has similar instructions.
1
Find the HCIT cover, left.
2
Remove the HCIT cover, left. Go to
Note: The left side anti-tip assembly will come off when removing the HCIT cover, left.
"High capacity input tray (HCIT) cover, left removal" on page
Repair information
425
7462
423.