Right Transfer Roll Bracket Assembly Removal - Lexmark 7462 series Service Manual

Installation warning: When reinstalling the transfer roll bracket assembly, left, ensure that the bushing
(C), spring (D), and ground wire (F) are properly replaced.

Right transfer roll bracket assembly removal

1
Remove the transfer roll assembly. Go to
2
Remove the inner deflector. Go to
3
Remove the screw (A) securing the transfer roll bracket assembly, right to the machine.
4
Remove the transfer roll bracket assembly, right.
Transfer deflector removal
1
Remove the transfer roll assembly. Go to
2
Gently unsnap the transfer deflector from the machine.
3
Remove the transfer deflector.
"Transfer roll assembly removal" on page
"Inner deflector removal" on page
"Transfer roll assembly removal" on page
Repair information
353
351.
337.
A
351.
7462