Lvps Card Assembly Removal - Lexmark 7462 series Service Manual

6
Remove the four screws (B) on the right securing the laser cover.
7
Remove the sensor (ADF media exit) bracket assembly.
8
Remove the print cartridge cover. Go to
page 355.
9
Remove the laser cover.

LVPS card assembly removal

Warning—Potential Damage: When replacing the LVPS card assembly, ensure that the voltage selection
switch is set to the proper setting, or damage will occur.
1
Remove the rear door assembly. Go to
2
Remove the right side cover. Go to
page 332 or "Right side cover removal (model X658)" on page
B
"Print cartridge cover assembly removal (model X658)" on
"Rear door assembly removal" on page
"Right side cover removal (models X651, X652, X654, and X656)" on
Repair information
328
368.
331.
7462