Top cover assembly removal
Note: First, remove the bridge unit and the finisher, if equipped.
1.
Remove the operator panel assembly. See
2.
Remove the printer front door assembly. See
3.
Remove the front left cover. See
4.
Remove the two screws securing the top cover assembly (A).
5.
Remove the top cover assembly (A) by sliding it to the right and then forward in the direction of the arrow.
"Operator panel assembly removal" on page
"Printer front door assembly removal" on page
"Printer front door assembly removal" on page
A
Front
4024-110
4-6.
4-8.
4-8.
4-7
Repair information
Previous
Next
Go Back