List Of Status And Error Messages; Answering; Busy; Call Complete - Lexmark 7462 series Service Manual

Action
Step 10
Replace the ADF controller card assembly. Go to
card removal" on page
Does the problem remain?
Step 11
Perform a print test using the ADF.
Does the problem remain?

List of status and error messages

Answering

The printer is answering a fax call. Wait for the message to clear.

Busy

Wait for the message to clear.

Call complete

A fax call is completed. Wait for the message to clear.
Change <src> to <x>
<src> is a tray or feeder, and <x> is a paper size or type.
You can change the current paper source for the remainder of the print job. The formatted page will print
on the paper loaded in the selected tray. This may cause clipping of text or images. Try one or more of the
following:
•
Select the paper tray with the correct paper size or type.
•
Touch Use current [src] to ignore the message and print from the tray selected for the print job.
•
Touch Continue to continue the job if the correct size and type are loaded in the tray, and this size and
type are specified in the printer control panel Paper menu.
Note: If you touch Continue when there is no paper in the tray, the job is not continued.
•
Touch Cancel job to cancel the current job.
Check tray <x> connection
Try one or more of the following:
•
Turn the printer off and then back on.
541.
Diagnostic information
Yes
Go to step 11.
"ADF controller
Contact the next
level of support.
184
7462
No
The problem is
solved.
The problem is
solved.