Duplex Input Sensor Assembly Removal - Lexmark 7462 series Service Manual

3
Remove the four screws (A) securing the duplex assembly to the machine.
4
Remove the harnesses (B) from the clamp.
5
Disconnect the connection (C) from the duplex assembly.
B C
Note: When removing the duplex assembly, the lower duplex drive belt (D) will become detached.
6
Remove the duplex assembly.
Installation warning: When replacing the duplex assembly, ensure that the lower duplex drive belt (D) is
properly reattached.

Duplex input sensor assembly removal

1
Remove the media tray.
2
Gently place the printer on its left or right side.
3
Disconnect the connection (A) from the duplex input sensor assembly.
4
Remove the two screws (B) securing the duplex input sensor assembly to the machine.
5
Remove the duplex input sensor assembly.
A B
Repair information
356
7462
D
A