Adf Controller Card Removal - Lexmark 7462 series Service Manual

ADF controller card removal

1
Remove the ADF rear cover. Go to
2
Disconnect all cables attached to the controller card.
3
Remove the four screws (A) securing the ADF controller card.
4
Remove the ADF controller card.
ADF platen cushion removal
1
Lift the ADF unit assembly.
2
Unfasten the velcro.
3
Remove the ADF platen cushion.
ADF lower door assembly removal
1
Remove the ADF platen cushion. Go to
2
Open the ADF bottom door by pressing the green tab (A) on the underside of the front of the ADF unit
assembly.
3
Remove the screw (B) securing the ground wire to the ADF unit assembly.
"ADF rear cover removal" on page
A
"ADF platen cushion removal" on page
Repair information
541
538.
541.
7462