3
Remove the 250-sheet tray media out actuator from the drawer.
250-sheet tray frame assembly removal
Note: The 250-sheet tray frame assembly is not a FRU.
1
Remove the 250-sheet tray pick arm bracket assembly. Go to
removal" on page
404.
2
Release the hooks securing the sensor (pass through) to the drawer.
3
Remove the sensor (pass through) from the drawer.
4
Remove the four screws (A) securing the 250-sheet tray frame assembly to the drawer.
A
"250-sheet tray pick arm bracket assembly
A
Repair information
406
7462