Lexmark 7462 series Service Manual page 67

201 error messages
Error code Description
201.00 Sensor (fuser output) area jam (type 1 fuser)
The media is jammed in the sensor (fuser output)
area.
201.01 Main drive motor assembly load error (type 1 fuser)
The main drive motor assembly has failed or
caused high mechanical load due to paper jam or
bind.
201.02 Sensor (fuser output) late jam (type 1 fuser)
The media is late reaching the sensor (fuser
output) within the specified time.
201.03 Image data did not start in time (type 1 fuser)
Printhead write failure
201.04 Sensor (narrow media) late jam (type 1 fuser)
The expected wide media is late reaching the
sensor (narrow media) within the specified time.
201.06 Sensor (narrow media) late jam (type 1 fuser)
The expected wide media is late reaching the
sensor (narrow media) within the specified time.
201.07 Sensor (fuser output) late jam (type 1 fuser)
The media is late reaching the sensor (fuser
output) within the specified time.
201.25 Sensor (fuser output) late jam (type 2 fuser)
The media is jammed in the sensor (fuser output)
area.
201.26 Main drive motor assembly load error (type 2
fuser)
The main drive motor assembly has failed or
caused high mechanical load due to paper jam or
bind.
201.27 Sensor (fuser output) late jam (type 1 fuser)
The media is late reaching the sensor (fuser
output) within the specified time.
201.28 Image data did not start in time (type 2 fuser)
Printhead write failure
201.29 Sensor (narrow media) late jam (type 2 fuser)
The expected wide media is late reaching the
sensor (narrow media) within the specified time.
Action
Go to "Sensor (fuser output) service check" on
page 82.
Go to "Main drive motor assembly load error
service check" on page
Go to "Sensor (fuser output) late jam service
check" on page
Go to "Printhead write failure service check"
on page
Go to "Sensor (narrow media) late jam service
check" on page
Go to "Sensor (fuser output) late jam service
check" on page
Go to "Main drive motor assembly load error
service check" on page
Go to "Sensor (fuser output) late jam service
check" on page
Go to "Printhead write failure service check"
on page
Go to "Sensor (narrow media) late jam service
check" on page
Diagnostic information
67
80.
83.
85.
78.
83.
80.
83.
85.
78.
7462