Adf Solenoid Assembly Removal - Lexmark 7462 series Service Manual

ADF solenoid assembly removal

1
Remove the ADF front cover. Go to
2
Remove the ADF pick roll position cam assembly spring from the cam shaft lever.
3
Disconnect the solenoid wire harness.
4
Remove the two screws securing the solenoid bracket assembly to the frame of the ADF unit assembly.
5
Remove the ADF solenoid assembly.
Sensor (ADF top door interlock) removal
1
Remove the ADF rear cover assembly. Go to
2
Remove the feed motor bracket assembly. Go to
551.
3
Disconnect the sensor harness from the sensor.
4
Remove the sensor (ADF top door interlock) bracket screw (A).
5
Remove the bracket with the sensor (ADF top door interlock).
6
Detach the sensor (ADF top door interlock) from the bracket by squeezing the clip (B)and removing the
sensor.
Sensor (ADF lower door interlock) removal
1
Remove the ADF front cover. Go to
2
Remove the ADF platen cushion. Go to
"ADF front cover removal" on page
"ADF rear cover removal" on page
"ADF feed drive motor assembly removal" on page
B A
"ADF front cover removal" on page
"ADF platen cushion removal" on page
Repair information
554
537.
538.
537.
541.
7462