Set Clock - Lexmark 7462 series Service Manual

Set clock

The clock is not set. This message appears if no other fax status message appears. It remains until the clock
is set.
SMTP server not set up. Contact system administrator.
An error occurred on the SMTP server, or the SMTP server is not configured properly. Touch Continue to
clear the message. If the message appears again, contact your system support person.
Some held jobs were not restored
Touch Continue to delete the specified job.
Note: Some held jobs are not restored. They stay on the hard disk and are inaccessible.
System busy, preparing resources for job.
Not all resources needed for the job are available. Wait for the message to clear.
System busy, preparing resources for job. Deleting held job(s).
Not all resources needed for the job are available. Some held jobs are deleted to free system memory. Wait
for the message to clear.
Unsupported disk
An unsupported printer hard disk has been installed. Remove the unsupported device, and then install a
supported one.
Unsupported USB device, please remove
Remove the unrecognized USB device.
Unsupported USB hub, please remove
Remove the unrecognized USB hub.
USB/USB <x>
The printer is using a USB cable connection. The USB port is the active communication link.
Waiting for redial
The printer is waiting to redial the fax number. Wait for the message to clear.
Diagnostic information
193
7462