Network/Network <X - Lexmark 7462 series Service Manual

Network/Network <x>
The printer is connected to the network.
Network indicates that the printer is using the standard network port built into the printer system board.
Network <x> indicates that an internal print server is installed inside the printer or that the printer is
connected to an external print server.
No analog phone line connected to modem, fax is disabled.
The printer is not detecting an analog phone line, so the fax is disabled. Connect the printer to an analog
phone line.
No answer
A fax number is dialed, but no connection is made. Wait for the message to clear.
No dial tone
The printer does not have a dial tone. Wait for the message to clear.
Queued for sending
The scanning process of a fax job completed, but the job is not sent yet because another fax job is being
sent or received. Wait for the message to clear.
Ready
The printer is ready to receive print jobs.
Reattach bin <x>
Try one or more of the following:
•
Turn the printer off and then back on.
If the error occurs a second time:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the specified bin.
4
Reattach the bin.
5
Connect the power cord to a properly grounded outlet.
6
Restart the printer.
If the error occurs again:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
Diagnostic information
189
7462