Sensor (Mfp Stapler Assembly Finisher Media Bin Present) Removal - Lexmark 7462 series Service Manual

4
Remove the LED sensor cover.
Sensor (MFP stapler assembly finisher media bin present) removal
1
Remove the LED sensor cover. Go to
2
Using a flat-blade screwdriver, release the tabs (A) on the sensor and remove it from the sensor cover.
A
3
Remove the harness connected to the sensor (finisher media bin present).
4
Remove the sensor (finisher media bin present).
"MFP stapler assembly LED sensor cover removal" on page
Repair information
490
7462
489.