Redrive Assembly Removal - Lexmark 7462 series Service Manual

5
While pressing the two buttons (A), pull the fuser unit assembly from the machine.
Installation warning: When replacing the fuser unit assembly, ensure that the electrical connection (B)
and the two buttons (A) are properly secured.

Redrive assembly removal

1
Remove the rear door assembly. Go to
2
Open the fuser access door.
3
Remove the two screws (A) securing the redrive assembly to the machine.
4
Press the two tabs (B) to release the redrive assembly to the machine.
5
While pressing the two tabs (B), pull the redrive assembly from the machine.
B
A
"Rear door assembly removal" on page
B
A
Repair information
B
374
7462
368.