Lexmark 7462 series Service Manual page 86

If the paper is not exiting the printer:
1
Pull down the top rear door.
2
Remove the jammed paper.
3
Close the top rear door.
4
Touch Continue.
202 error messages
Error code Description
202.00 Paper jam around fuser exit or redrive area (type
1 fuser)
Page may be jammed in fuser exit or redrive area.
202.01 Sensor (fuser output) lingering jam (type 1 fuser
and destination is standard bin)
Media reached the sensor (fuser output), but did
not clear it in the specified time, and did not reach
the sensor (narrow media).
202.02 Sensor (fuser output) lingering jam (type 1 fuser)
Media reached the sensor (fuser output), but did
not clear it in the specified time
202.03 Sensor (narrow media) static jam (type 1 fuser)
Media remains on the sensor (narrow media)
during the warm‑up sequence.
202.04 Sensor (fuser output) bounce (type 1 fuser)
The sensor (fuser output) rebounded once the
trailing edge of the media passed.
202.06 Sensor (fuser output) static jam (type 1 fuser)
Media remains on the sensor (fuser output) during
the warm-up sequence.
Action
Go to "Paper jam around fuser exit or redrive
area service check" on page 92
Go to "Sensor (fuser output) lingering jam
service check" on page 94
Go to "Sensor (narrow media) static jam
service check" on page 96
Go to "Sensor (fuser output) service check" on
page 82
Go to "Sensor (fuser output) static jam service
check" on page 95
Diagnostic information
86
7462