System Timeout Service Check - Lexmark 7462 series Service Manual

Error code Description
81 The fuser that had been previously installed in a
different printer has reached its maximum page
count.
88A The toner cartridge supply is low.
88C The toner cartridge supply is very low.
88C The toner cartridge supply is empty.

System timeout service check

Action
Turn off the printer, wait for a few seconds, and then turn on the
printer.
Does the problem remain?
Invalid print cartridge service check
Action
Install the proper print cartridge.
Does the problem remain?
Defective print cartridge service check
Action
Step 1
Install the proper print cartridge.
Does the problem remain?
Step 2
Remove and then reinstall the print cartridge ID connector
assembly. Go to "Print cartridge ID connector assembly removal"
on page 316.
Does the problem remain?
Step 3
Replace the print cartridge ID connector assembly. Go to
cartridge ID connector assembly removal" on page
Does the problem remain?
Action
Go to "Replace fuser service check" on
page 214.
Go to "Replace cartridge service check" on
page 214.
Go to "Replace cartridge service check" on
page 214.
Go to "Replace cartridge service check" on
page 214.
"Print
316.
Diagnostic information
204
Yes No
Contact next level of Problem is solved.
support.
Yes No
Contact next level of Problem is solved.
support.
Yes No
Go to step 2. Problem is solved.
Go to step 3. Problem is solved.
Contact next level of Problem is solved.
support.
7462