Reattach Bin <X> – <Y - Lexmark 7462 series Service Manual

3
Remove the specified bin.
4
Contact Customer Support.
•
Touch Continue to clear the message and print without using the specified bin.
Reattach bin <x> – <y>
Try one or more of the following:
•
Turn the printer off and then back on.
If the error occurs a second time:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the specified bins.
4
Reattach the bins.
5
Connect the power cord to a properly grounded outlet.
6
Restart the printer.
If the error occurs again:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the specified bins.
4
Contact Customer Support.
•
Touch Continue to clear the message and print without using the specified bins.
Reattach envelope feeder
Try one or more of the following:
•
Turn the printer off and then back on.
If the error occurs a second time:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the envelope feeder.
4
Reattach the envelope feeder.
5
Connect the power cord to a properly grounded outlet.
6
Restart the printer.
If the error occurs again:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the envelope feeder.
4
Contact Customer Support.
•
Touch Continue to clear the message and print without using the envelope feeder.
Diagnostic information
190
7462