7.
Rotate the contact end of the bellcrank down (C) and remove. Be careful not to lose the spring (D).
Installation note
Replace the bellcranks by using reverse order of removal.
Note: Test the color coverage by running the Print Quality Pages in the Diagnostics or Configuration Menu.
Redrive assembly removal
See
"Redrive assembly" on page 7-14
1.
Remove the redrive door. See
2.
Remove the fuser bottom duct. See
3.
Remove the redrive assembly screw (A) type
for the part number.
"Redrive door removal" on page
"Fuser bottom duct removal" on page
"323" on page
A(323)
4-26.
4-46.
4-3.
Repair information
5061
4-83