How To Select Sensor Settings - Furuno FMD-3200 Operator's Manual

Electronic chart display and information system

Hide thumbs Also See for FMD-3200:

Table of Contents

How to Select Sensor Settings

This ECDIS system accepts navigation data input two ways: System or Local. System

shares sensor data among multiple ECDIS in network. Sensor priority is also com-

monly shared among the ECDIS. Local selects a sensor outside the network.

1. Right-click anywhere in the [Sensor information] box to show the context-sensitive

2. Click [Local] or [System] as applicable.

Note: Sensor system can also be selected from the menu. Open the menu and

click [System/Local Select] on the [Sensor] menu. Click the circle next to [System

Sensor] or [Local Sensor] as appropriate then click the [Save] button.

1. INTRODUCTION

Fmd-3200-bb Fmd-3300