Furuno FMD-3200 Operator's Manual page 53

Color of nav data indications and sensor name
The color of the nav data indications and sensor name change according to the state
of the sensor data. The table shown below provides basic information. For detailed in-
formation, see Appendix 4. When no sensor data is received, the sensor source indi-
cation is blank. These indication methods comply with IEC62288 Ed.2.
Nav data indication
12.5
kn
GPS1
0.3kn
286.0°T
GPS1
13.1
kn
30°00.0000'N
020°00.0000'E
GPS1
MAN
MAN
DR
Note: Depending on settings selected at installation, the integrity check (see
section 18.7) result colors can be changed. In this case, nav data color changes ac-
cording to status as follows:
• [Passed] or [Low Accuracy]: Green
• [Doubtful]: Yellow
• [Failed], [Excluded] or [Not Available]: Bright yellow
Color of nav data
Color of
indication
sensor name
Green White
Yellow White
Yellow-orange Yellow-orange
Green, data shown
No display
with asterisks
(***.*)
Yellow White
2. OPERATIONAL OVERVIEW
State
Sensor is normal.
Validity of data is low or offset
is applied.
Data is invalid.
Data is not being received.
Data is input manually (dead
reckoning).
2-11