Furuno FMD-3200 Operator's Manual page 156

9. ROUTES
5. Repeat step 4 to enter other waypoints.
6. After you enter the final waypoint, right-click the display to show the context-sen-
sitive menu then select [Finish].
7. Click the [Save] button. Enter a name (max. 63 characters) for the route, using the
keyboard on the Control Unit or software keyboard. Click the [OK] button to finish.
8. Use the [Alert Parameters] page to define the safety contour and other specified
conditions for checking the route. Click an item to place a check in the box, high-
lighting that type of chart alert area. Also, input value for [Draught/m]. A parameter
for [Draught/m] can also be assigned globally to all legs from the context-sensitive
menu. See section 9.4.4 for how to use the [Alert Parameters] page.
9. Use the [Check Route] button on the [Alert Parameters] page to detect areas
where the depth is less than the safety contour or where specified conditions exist.
The results appear on the [Check Results] page. This system can examine chart
database against planned route to make a list of alerts where a route crosses a
safety contour or specified areas used in chart alerts.
10. Use the [User Chart] page to link, de-link a user chart(s) with the route.See
section 9.4.2.
11. Use the [Optimize] page to enter parameters for route optimization. See
section 9.4.3.
12. Click [Save]. The [Save Route] dialog appears.
13. Input a name for the new route, then click [OK]. The route is now saved in the
Route Bank.
How to use the Undo feature
The Undo feature, available when creating a route and a user chart, can be accessed
from the [Undo] button on the InstantAccess bar™. In route creation the feature is
used with waypoint and text input.
Waypoint input: Delete last-entered waypoint.
Text input: Erase last-entered character or character string.
9-4