Furuno FMD-3200 Operator's Manual page 330

22. CONNING DISPLAYS
Conning display Status bar
No. Button
1 Display mode
2 Conning display
sheet
3 SILENT
4 TOOL
5
6
7
8
9 Date
10 Time
11
E E
22-2
SILENT
Selects the display mode. See section 2.2.
Selects the conning display sheet to use, Sheet.1 - Sheet.6. (Sheet name
is decided at installation. "Sheet x" (x=sheet number) is the default sheet
name.)
Goes to the Silent mode. See section 1.4.
Shows, hides the software keyboard; adjusts the volume of the key beep
and audio alert.
Shows, hides
software keyboard
Adjusts volume of
key beep, audio
alert
Selects a display palette. See section 1.7.
Adjusts the brilliance of the monitor. See section 1.8.
Takes a screenshot. See section 1.14.
Displays system information and the Operator's Manual. Conning informa-
tion appears in the Version tab.
See section 1.13
See section 1.13.
Rotates clockwise if the system is working properly. See section 2.1.2.
Description
Volume setting
To adjust a
volume, put
cursor in
applicable
box.
Version nos.
subject to change.
E E
Click up arrow
to raise volume;
down arrow to
lower volume.