Usage Characteristics, Limitations; How To Deactivate And Erase The Divider - Furuno FMD-3200 Operator's Manual

00:13
00:26
22.60NM
11.63NM
170.6°
00:13
00:13
10.57NM
10.97NM
213.6°
00:00
00:00
Note: If you drag a point to the edge of the displayed area, the chart scrolls in that
direction.
12.9.2

Usage characteristics, limitations

• The distance between points is shown to the hundredths decimal place up to 100
NM and to the tenths decimal place thereafter.
• A maximum of 50 points can be inserted, and the maximum measurable distance
between two points is 240.0 NM.
• The TTG value is rounded to the nearest decimal place. Therefore, the displayed
total TTG may not equal the sum of all the TTGs.
• The TTG is measurable to 99:00. If the TTG is higher, the TTG indication is
">99:00".
• The ship's speed must be at least 0.5 kn to calculate TTG.
• The divider cannot be used in latitude higher than 85° when Rhumbline is in use..
• In the split screen display, the divider is viewable on both the main and sub views,
but is operable only on the main view; that is, the view whose [ACTIVE] button is
colored light blue).
12.9.3

How to deactivate and erase the divider

Get into the Voyage navigation or Voyage planning mode then
right-click the screen to show the context-sensitive menu. Select
[Clear Divider].
Drag here
12. NAVIGATION TOOLS
11.63NM
00:13
261.1°
00:26
22.60NM
11.63NM
170.6°
00:13
00:13
10.57NM
10.97NM°
213.6°
00:00
00:00
2.75NM
358.6°
Ship on center
Pick Report
Chart Legend
Manual Update
Clear Divider
12-13