How To Set The Tt Source; Tt Source For Configurations Compliant With The Latest Regulations - Furuno FMD-3200 Operator's Manual

13. TRACKED TARGET (TT) FUNCTIONS
13.7

How to set the TT Source

13.7.1 TT source for configurations compliant with the latest regula-
tions
When the connected radar is compliant with the latest regulations, the TT source can
be set as one of the antennas (ANT_1 etc.) from the [TT Source] drop-down box.
Normally, select the radar antenna which is selected to display radar echoes as the
TT source.
To automatically select the radar currently displaying radar echoes as the TT source,
check the [SYNC. ANT] box on the [TT/AIS] page in the [Overlay/NAV Tools] box.
Notes on usage
• Antennas are displayed in numerical order, based on their SFID (Service Flow ID).
For example, to use RAS001 select [ANT_1], to use RAS002 select [ANT_2].
• With [SYNC. ANT] checked, the antenna selected on the [Echo] page in the [Over-
lay/NAV Tools] box is marked with an asterisk.
• With [SYNC. ANT] checked, the checkmark is removed when a selection is made
the drop-down box.
• [SYNC. ANT] is inoperative if no antenna is registered.
• The [Datum] button has no function when the connected radar is compliant with the
latest regulations.
13-8