Furuno FMD-3200 Operator's Manual page 461

ALF ALR
No. Inst.* No.
260 - 260
10960 - 961
30001 1 001
30001 2 002
30001 3 003
30001 4 004
30001 5 014
Priority/
Alert name
Category
Emergency Call Alarm/A
Takeover AMS Warning/
Master B
Main Monitor Fan1 Caution/B
Rotation Speed
Lowering
Main Monitor Fan2
Rotation Speed
Lowering
Main Monitor Fan3
Rotation Speed
Lowering
Main Monitor Fan4
Rotation Speed
Lowering
Sub Monitor Fan1
Rotation Speed
Lowering
APPENDIX 5 ALERT LIST
Meaning
When not acknowl- Acknowledge 152
edging alerts relat- Wheel Over Line
ed to WPT alert or 153 Track
approach or track Control Stop.
control stop alert
during track control,
alert is forwarded to
BNWAS by this sig-
nal on 30 seconds
after passing WOL.
This is not shown.
When connection This alert appears
with the MAIN AMS when the MAIN
is lost and the AMS is turned off
BACKUP AMS is also. Check the
assigned as the power and connec-
MAIN, this alert ap- tions to the MAIN
pears. AMS as neces-
sary.
For MU-190/231: If the error fre-
Connected to quently occurs,
COM1(Main Moni- contact FURUNO
tor). and inform fre-
Fan1 rotation speed quency of occur-
is below threshold. rence.
For MU-231: Con- If the error fre-
nected to quently occurs,
COM1(Main Moni- contact FURUNO
tor). and inform fre-
Fan2 rotation speed quency of occur-
is below threshold. rence.
For MU-231: Con- If the error fre-
nected to quently occurs,
COM1(Main Moni- contact FURUNO
tor). and inform fre-
Fan3 rotation speed quency of occur-
is below threshold. rence.
For MU-190: Con- If the error fre-
nected to quently occurs,
COM1(Main Moni- contact FURUNO
tor). and inform fre-
Fan4 rotation speed quency of occur-
is below threshold. rence.
For MU-190/231: If the error fre-
Connected to quently occurs,
COM2 (Sub Moni- contact FURUNO
tor). and inform fre-
Fan1 rotation speed quency of occur-
is below threshold. rence.
Remedy
AP-41