Function Availability; Split Screen Usage Characteristics - Furuno FMD-3200 Operator's Manual

1. INTRODUCTION
1.18.2

Function availability

AIS target
Anchor watch
Chart display
Danger highlight
Divider
EBL, VRM
Parallel index lines
Radar overlay
Range rings
TT
Weather overlay
1.18.3

Split screen usage characteristics

• If the sub view is not displayed correctly, restore the full screen display then try to
activate the split screen again.
• The display may not be updated when switching to the Voyage planning mode. If
this occurs, switch to the Voyage navigation mode, restore the split screen display
then return to the Voyage planning mode.
• The own ship mark may not appear at the screen center when releasing the split
screen display. If this occurs, click the indication "TM/CU Reset" at the top right po-
sition on the screen to show the own ship mark at the screen center.
• The TM reset feature only works on the active display. To return the own ship mark
to the screen center, click the indication [TM/CU Reset] at the top right position on
the screen.
• The sub view can use a location and chart scale different from the main view.
• The chart scale related messages (overscale, larger ENC available, etc.), which ap-
pear beneath the chart scale indication, show only on the main view.
1-20
Item
Viewable
Main Sub
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes No
Operable
Main Sub
Yes Yes
Yes No
Yes No
Yes No
Yes No
Yes Yes
Yes Yes
Yes -
Yes No
Yes Yes
Yes -