Furuno FMD-3200 Operator's Manual page 382

25. ALERT MANAGEMENT SYSTEM (option)
ALERT LIST window
The [ALERT LIST] window is a context-based list of generated alerts, providing alert
sources and aggregation. Alert sources are Navigation, Communication and External.
To show alert source or aggregation, click the [Alert Source] or [Aggregation] tab, re-
spectively.
Alert Source tab
No. Item name
1 Current Alert box
2 Alert Source tab, Aggre-
gation tab.
3 Priority
4 Category
5 [], []
(page selection buttons)
6 Alert state icon
7 Alert priority, category,
alert no., instance, alert
text.
25-20
This box shows the name of the active alert(s), in order of pri-
ority.
Click respective tab to show its contents.
Filter the list by the alert priority, [Emergency], [Alarm], [Warn-
ing], [Caution].
Filter the list by the alert category, A, B or C.
These buttons appears when there are more than 20 alerts.
The buttons are greyed out if there is only one page of alerts.
: Go to first page; : Go back one page
: Go to next page; : Go forward one page
Shows alert state. (Active alerts only)
The data (priority, category, alert no., alert name) of all alerts
related to the alert source selected from the [Alert Source]
window are shown in green. However active alerts are shown
in red (emergency and alarm), yellow-orange (warning) or
yellow (caution).
Description