How To Select The User Chart Objects To Display; How To Import A User Chart; User Chart Created On Another Unit - Furuno FMD-3200 Operator's Manual

10.7

How to Select the User Chart Objects to Display

User charts can be displayed on the electronic chart. On the Instant Access bar, click
[DISP], [SET], and [Symbol DISP]. Open the [Mariner] page and check the user chart
items to display. Choose the degree of transparency for the objects with [Density].
Note: Alpha blending technology is used for transparency effects.
10.8

How to Import a User Chart

10.8.1

User chart created on another unit

Do as follows to import user charts created on other units (FMD-3x00, FCR-2xx9,
FAR-3xx0).
1. Copy the user chart to a USB flash memory then insert the flash memory in the
USB port on the control unit.
2. Click [
3. Click the [OK] button to open the [Settings] menu.
4. Click the [File Import] tab.
5. Click the [Select file to import button], select a file, then click the [Open] button.
6. Put a checkmark at [Route/User chart].
7. Click the [Import] button.
]on the Status bar, then click [Settings].
10. USER CHARTS
10-9