How To Filter The Danger Targets Log - Furuno FMD-3200 Operator's Manual

Electronic chart display and information system

Hide thumbs Also See for FMD-3200:

Table of Contents

19. RECORDING, PLAYBACK FUNCTIONS

How to filter the danger targets log

You can filter the danger targets log by CPA or TCPA. When a TT or AIS target's CPA

or TCPA is lower than the setting here, the target's details are automatically logged.

To set the filter, do the following:

1. Open the menu and select [Log], [Target Log] and [Danger Target] to show the

[Danger Targets] menu.

2. At [CPA/TCPA], select [ON].

3. At [CPA], set the distance for the CPA.

4. At [TCPA], set the time for the TCPA.

Note: [Log Interval] is fixed at 10 minutes.

5. Click [Save] to save the settings, then click [Close] to close the menu.

Fmd-3200-bb Fmd-3300