Initial Settings; How To Select Language - Furuno FR-10 Operator's Manual

1.4

Initial Settings

Many of the procedures covered in this section require access to the following protect-
ed menus.
• Units menu
• SCX-21 menu
To operate the menus, Press the MENU key to show menu window, and then press
the MENU key five times while pressing down the CANCEL/HL OFF key. Further, to
prevent unintended changes to these settings, always restart the system after chang-
es are made. Restarting the system will re-apply the menu protection.
1.4.1

How to select language

Language selection at initial start up
At the first power on after installation or whenever the memory is cleared, the lan-
guage selection screen appears. Select your language as shown below. The default
language is English.
1. Press the (
screen appears followed by the language selection screen.
2. Operate the cursorpad ( or ) to select the language of your choice then press
the ENTER key. A confirmation message appears.
3. Push  on the cursorpad to select [Yes] then press the
ENTER key.
Initializing screen appears.
• TT Advanced menu
• Installation menu
/BRILL) key on the display unit to turn on the power. The splash
1. INSTALLATION & WIRING
• SCX-20 menu
• Factory menu
1-9