Furuno FMD-3200 Operator's Manual page 197
Electronic chart display and information system
Hide thumbs
Also See for FMD-3200:
- Operator's manual (450 pages) ,
- Installation manual (142 pages) ,
- Instruction manual (133 pages)
Table of Contents
Advertisement
Area report
The area report provides the following information
• Name of area
• Latitude and longitude position of each point on the area
• [On Radar] appears with those areas selected to show on the radar overlay.
(Checkmark in the [Radar] column of [User Chart] dialog box. See section 10.3.)
• [Danger] appears with those areas selected to show on the radar overlay. (Check-
mark in the [Danger] column of [User Chart] dialog box. See section 10.3.)
• [Has Notes] appears with those areas selected to show on the radar overlay.
(Checkmark in the [Has Notes] column of [User Chart] dialog box. See section
10.3.)
Areas
Circle report
The Circle report provides the following information.
• Name of circle
• Latitude and longitude position of circle and its radius
• [On Radar] appears with those circles selected to show on the radar overlay.
(Checkmark in the [Radar] column of [User Chart] dialog box. See section 10.3.)
• [Danger] appears with those circles selected to show on the radar overlay. (Check-
mark in the [Danger] column of [User Chart] dialog box. See section 10.3.)
10. USER CHARTS
10-15
Advertisement
Table of Contents
Troubleshooting
