Alert List - Furuno FMD-3200 Operator's Manual

20. ALERTS
20.5

Alert List

The [Alert List] displays all active alerts, with unacknowledged alerts at the top, in pri-
ority order. To display the list, right-click the [Alert List/Alert Log] button in the [Alert]
box then select [Alert List]. The ZDA sentence is required to display the time in the list.
The list shows
• Alert no., alert instance
• Alert name
• Source of alert
• Time (UTC) alert was generated
ACK ALL button
Alert no.
Alert info icon
The background color changes according alert state as follows.
Unacknowledged alert (flashing display): Emergency, Alarm, red; Warning, Bright
yellow
Acknowledged alert (steady display): Emergency, Alarm, red; Warning, Bright yel-
low; Caution, yellow
The Alert status column shows the following:
• Left: Alert icon for Emergency, Alarm, Warning, Caution is shown. See 1-11 on page
20-4.
• Center: Alert icon for Emergency, Alarm, Warning is shown. See 13, 14 on page 20-
4.
• Right: Aggregate icon is shown. See page 20-4. Blank if no active aggregate alert.
To find details about an alert, right-click the applicable alert. See the detailed informa-
tion in the [Decision Support] box at the top of the screen.
The [ACK] button acknowledges the alert at the top of the Alert list. Emergency, Alarm,
and Warning categories can be acknowledged by clicking them in the list.
20-6
Filter
Alert details
Silence buzzer
No.1 Chart R ..
No.1 Chart R ..
No.1 Chart R ..
No.1 Chart R ..
No.1 Chart R ..
No.1 Chart R ..
No.1 Chart R ..
Alert text
No.1 Chart R ..
Time
Source
generated
• Time (UTC) alert was acknowledged
• Details about the alert selected
• Quantity of unacknowledged alerts
Time
ACKed
Page selection buttons
Click to select page.
Available only when
multiple pages exist.
► : Show next page
►| : Jump to last page
◄ : Show previous page
|◄ : Jump to first page