Furuno FMD-3200 Operator's Manual page 186

10. USER CHARTS
(2) Click
(1) Click
How to create a line
(4) Right-click;
select Finish.
How to create an area
When you insert an object, the following is done in the [User Chart] dialog box:
- Name of the object button appears in the [Object] window
- Latitude and longitude position of the object is displayed
- Total object count is updated
6. To enter a name for the object, click the appropriate location in the [Name] window
then use the software keyboard or the Control Unit to enter a name.
Note: The name entered for circles and areas can be shown inside the area or
circle on the screen. For details, see paragraph 4.3.4.
7. Label, line, clearing line, area, circle: Click the corresponding box in the [Radar]
column to hide or show the checkmark to display or don't display the object on the
radar overlay.
Note: The clearing line setting is fixed to ON. (The checkmark is greyed out.)
8. Label, line, clearing line, area, circle: Click the corresponding box in the [Dan-
ger] window to hide or show the checkmark to use or don't use the object in chart
alert calculation. For the tidal mark, go to step 9.
9. Line, area, circle: Do as shown below to add Notes data. For other objects go to
step 10.
1) Enter the text for the Notes in the [Description] box.
2) Click the box in the [Notes] window of the [User Chart] dialog box to set the
message display method.
• E: Message appears when your ship approaches the user chart object. For
10-4
(3) Click
(4) Right-click;
select Finish.
(1) Click
(2) Click
(3) Click
a line, message appears when you are "x" miles from the line, which is set
with [Range of notes].
(1) Click
(2) Drag cursor;
click to set.
1) Put cursor where to locate center of circle
then click.
2) Drag cursor to set radius; click to set.
How to create a circle