Furuno FMD-3200 Operator's Manual page 381

ALERT LOG window
The [ALERT LOG] window provides a comprehensive list of generated alerts.
No. Item name
1 Current Alert box
2 Priority
3 Source
4 Category
5 Log Search box
6 Export Log button
7 Reset button
8 Search button
9 [], []
(page selection buttons)
10 Priority
11 Cat.
12 Alert No., Instance
13 Alert text
14 Source
15 Occurred Time(UTC)
16 ACKed Time(UTC)
17 Rectified Time(UTC)
25. ALERT MANAGEMENT SYSTEM (option)
This box shows the name of the active alert that has the highest
priority. You can acknowledge the alert by clicking the box.
Filter the list by the alert priority; [Emergency], [Alarm], [Warning],
[Caution].
Filter the list by the source of alert; [Navigation], [Communication],
[External].
Filter the list by alert category; A, B or C.
Enter the text string to search.
Export the contents of the log to a USB flash memory, in ".dat" for-
mat.
Stop the text search and restore the list to its pre-search state.
Search the string entered in the [Log Search] box.
These buttons appears when there are more than 20 alerts. The
buttons are greyed out if there is only one page of alerts.
: Go to first page; : Go back one page
: Go to next page; : Go forward one page
Priority of the alert.
Category of the alert.
Alert number and instance.
Name of alert.
The name of the device that generated the alert.
The time (UTC) the alert occurred.
The time (UTC) the alert was acknowledged.
The time (UTC) the alert was rectified.
Description
25-19