How To Delete Enc, Arcs Licenses - Furuno FMD-3200 Operator's Manual

3. HOW TO MANAGE CHARTS
4. When the installation is completed, information about the installation appears in
the [Result] window. Click the [Confirm] button to finish.
Result
5. If applicable, set the next sequential medium then repeat steps 2-4 to install the
next charts.
6. After all necessary charts are installed, reset the power.
Note 1: When many charts are installed, the ECDIS checks for error in the installed
data at the next power up. This is not an indication of malfunction.
Note 2: If, after installation, no ARCS chart appears, delete all ARCS charts and then
reinstall them.
3.4

How to Delete ENC, ARCS Licenses

1. Get into the Chart maintenance mode.
2. Click the [License] button on the InstantAccess bar
3. Click the [ENC] or [ARCS] tab as appropriate to show a list of licenses.
4. Put a checkmark next to the license(s) to delete.
5. Click the [Delete Licenses] button to delete the license(s) selected.
3-8
™
.