Instant Track Messages - Furuno FMD-3200 Operator's Manual

11. HOW TO MONITOR ROUTES
11.8.3

Instant track messages

The table below shows all the instant track messages and their meanings.
Message
(1) Instant Track mode
"Back to Track"
"Safe Off Track"
(2) Check result, error message
"Could not create the Track."
"Too far destination from own
ship."
"ROT value not inputted correct-
ly."
"Checking"
"OK"
"NG"
"Check error"
"Instant track is expired."
"Too many WPTs in monitoring
route."
(3) User operation message
"Please click a destination."
"Please click a point to decide an
angle."
"Please click a WPT on leg."
(4) Name of instant track route
InstantTrack_XXX
(XXX: 0001 - 400)
11-10
Meaning
Back to track mode
Safe off track mode
The track could not be created.
Selected destination is 50 NM or more from cur-
rent position.
No ROT data input, or data is incorrect. Cannot
create instant track.
Checking route.
Instant track checked and is suitable to follow.
Route check failed.
Route check error.
Route monitor timeout.
More than 190 waypoints are in the monitored
route. (Instant track cannot be created.)
Select a destination in the [Safe Off Track] mode. White
Set the angle of approach in the [Safe Off Track]
mode.
Click a waypoint on a leg in the [Back to Track]
mode.
Name of monitored instant track route
Color
White
White
Yellow
Yellow
Yellow
Red
Green
Red
Red
Red
Red
White
White
White