25.13 Responsibility Transfer Alert - Furuno FMD-3200 Operator's Manual

Electronic chart display and information system

Hide thumbs Also See for FMD-3200:

Table of Contents

25. ALERT MANAGEMENT SYSTEM (option)

25.13 Responsibility Transfer Alert

MSC302(87) requires the use of the "responsibility transfer alert," which functions in

the multiple sensor, multiple equipment installation. When one sensor or one equip-

ment fails but does not disturb the system operation (other sensor or equipment is nor-

mal), the AMS automatically sends the "responsibility transfer alert" (ACN sentence)

to the sensor or equipment that generated the alert.

If the sensor or equipment refuses the responsibility transfer, normal operation is re-

If the HBT sentence is not received from equipment within the prescribed time interval,

the alert processed as responsibility transfer alert is made active and the "System

communication fail" alert is generated.

Check if there

is problem for

re-generated.

re-generated

Fmd-3200-bb Fmd-3300