Furuno FMD-3200 Operator's Manual page 167

6. Select the route that has the waypoint(s) you want to insert into the active route,
then click the [Open] button. In the example below, some waypoints of Untitled 3
will be inserted into Untitled 1.
7. At [Insert Position], select where you want to insert waypoints into the active route,
[Before] or [After] the waypoint selected in the next step. The [Reset] button re-
stores the route to the original condition.
8. In the left-hand column set the cursor on the waypoint where to insert waypoints
from the inactive route.
9. At the right-hand column, select the waypoint(s) to add to the active route. A con-
text-sensitive menu is available by right-clicking [WPT] in the inactive route. The
options available are [Select All], [Deselect All] and [Reverse] (reverse the order
of the waypoints in the inactive route).
10. Click the << button to insert the waypoint(s) from the inactive route to the active
route. In the example below, WPT3 of the inactive route is inserted at the end of
the active route, becoming its waypoint 4.
4
4 38°15.856'N
11. Click the [OK] button to finish.
148°13.4257E
9. ROUTES
9-15