How To Select What Parts Of A Route To Display; How To View Waypoint Information - Furuno FMD-3200 Operator's Manual

11. HOW TO MONITOR ROUTES
11.3

How to Select What Parts of a Route to Display

You can specify what parts of
the monitored route to display.
Click the [DISP], [SET] and
[Symbol DISP] buttons on the
InstantAccess bar™. Click the
[Route] tab.
11.4

How to View Waypoint Information

Click the [Voyage] and [Monitor INFO] buttons on the InstantAccess bar™ to show the
[Monitor Information] dialog box. Click the [Waypoints] tab to show waypoint info.
*
* Scroll list horizontally to
view items shown in the
right figure.
No. Item
1 To WPT, GO
button
Distance
Departure
Actual Aver-
age SPD
2 Waypoint list
11-4
The system chooses a next waypoint automatically. Check that the To way-
point is the desired one. The system will automatically advance to a next
waypoint when you pass the To waypoint. The default To WPT is WPT2. If
you desire a different one, select it here and the click the [GO] button.
Distance from current position to selected waypoint.
The time the route was selected for monitoring.
The average speed over the ground, measured every 30 seconds.
The waypoint list provides for each waypoint WPT no., name, latitude and
longitude position, ETA, plan speed, bearing and distance to leg*, steering
mode (rhumb line or great circle), radius, XTD limit, speed max, margin,
and local time.The bearing to a leg and the display method for leg distance
can be changed. For details, see section 9.4.1. *Can be changed. see [Leg/
NM] on page 9-5.
Description