Furuno FMD-3200 Operator's Manual page 344

23. SETTINGS MENU
No.
1 Page selection
buttons
2 [Save] button *
3 [CANCEL]
button *
4 [DEFAULT] but-
ton
5 Escalation Mode
6 Escalation Time
* These buttons appear when the settings of Escalation Mode or Escalation Time is
changed.
23-6
Name
Select alert page. : Go to first page; : Go to previous page
: Go to last page; : Go to next page
Save settings.
Cancel settings and restore all previous settings.
Restore factory settings.
Set the escalation mode.
Warning: Warning is repeated
when the [Escalation Time] elaps-
es.
Alarm: The alert priority is changed
if the alert is not acknowledged before the [Escalation Time]
elapses.
To globally assign escalation mode on the displayed page;
change the setting below the item.
Set the escalation time, the time to
wait before escalation occurs. The
settings are (in seconds) 30, 670,
90 120, 150, 180, 210, 240, 270
and 300.
To globally assign escalation time on the displayed page;
change the setting below the item.
Description