LIGHTS/METERS/SWITCHES
Push the bulb in, turn it counterclockwise and remove it.
Install the bulb in the reverse order of removal.
TURN SIGNAL RELAY INSPECTION
If the turn signals do not work properly, check for the following
items:
– battery conditions
– burned lamp
– lamp incorrect voltage
– loose connectors
If the items listed above do not show any problems, proceed as
follows:
Remove the front fairing.
Disconnect the turn signal conector and short it with an auxiliary
wire.
Turn the ignition switch and check the turn signal operation.
The turn signals do not work
• Short or open circuit in the main wiring
The turn signals light on
• Faulty turn signal relay
• Loose conector
COMBINATION METER
BULB REPLACEMENT
Remove the front fairing.
Remove the meter bulb sockets and replace the bulb if
necessary.
1 8 -4
XL2 0 0
BULB
BULB SOCKET