D-8 Perform Engine Maintenance - Deutz Models - Genie S-40 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST D PROCEDURES
D-8
Perform Engine Maintenance -
Deutz Models
Engine specifications require that this procedure be
performed every 1,000 hours.
All models:
• Engine mounts- check
• Hoses and clamps- check
• V-belts- adjust/replace
• Cold starting device (if equipped)- check
• Fuel filter- replace
D2011L03i models:
• Glow plugs- check
• Valve clearance- check/adjust
D 2.9 L4 models:
• V-belts- replace
• V-rib belts and tensioning pulley- adjust
Required maintenance procedures and additional
engine information are available in the
Deutz 2011 Series Operation Manual
(Deutz part number 0312-3547) OR the
Deutz 2.9 L4 Series Operation Manual
(Deutz part number 3012-3893)
Deutz 2011 Series Operation Manual
Genie part number
Deutz 2.9 L4 Series Operation Manual
Genie part number
3 - 54
D-9
Perform Engine Maintenance -
Deutz Models
Engine specifications require that this procedure be
performed annually.
D 2.9 L4 Models:
Required maintenance procedures and additional
engine information are available in the
Deutz 2.9 L4 Series Operation Manual
(Deutz part number 3012-3893)
Deutz 2.9 L4 Series Operation Manual
Genie part number
139320
1251561
S-40 • S-45 • S-40 TRAX • S-45 TRAX
• Fuel pre-filter- replace
October 2014
1251561
Part No. 826364