Genie S-40 Service Manual page 19

February 2014
Continued use of Chevron Aviation
A hydraulic oil when ambient
temperatures are consistently
above 32°F / 0°C may result in
component damage.
Note: Use Chevron Aviation A hydraulic oil when
ambient temperatures are consistently
below 0°F / -18°C.
Note: Use Shell Tellus S2 V 46 hydraulic oil when
oil temperatures consistently exceed 205°F / 96°C.
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult the Genie
Service Department before use.
Part No. 826364
Hydraulic Component
Specifications
Drive pump
Type:
Displacement per revolution, variable, 4WD models
Flow rate @ 2500 rpm
Drive pressure, maximum
Charge pump
Type:
Displacement
Flow rate @ 2500 rpm
Charge pressure @ 2500 rpm
Neutral position
Function pump
Type
Displacement
Flow rate @ 2500 rpm
Oscillation pump
Type
Displacement
Flow rate @ 2500 rpm
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
S-40 • S-45 • S-40 TRAX • S-45 TRAX
Section 2 • Specifications
SPECIFICATIONS
bi-directional,
variable displacement piston pump
0 to 2.8 cu in
0 to 28 gpm
gerotor pump
34.1 L/min
gear, pressure balanced
10.69 gpm
40.5 L/min
gear, fixed displacement
2.8 gallons per minute
10.6 liters per minute
0 to 46 cc
106 L/min
3625 psi
250 bar
0.85 cu in
13.9 cc
9 gpm
310 psi
21.4 bar
1.04 cu in
17 cc
0.37 cu in
6 cc
2 - 3