Genie S-40 Service Manual page 55

October 2014
2 Open the engine pivot plate latch and swing the
engine pivot plate out and away from the
machine.
3 Remove the fasteners from the engine side
cover, then remove the cover.
4 Inspect the oil cooler for leaks and physical
damage.
a b
a oil cooler
b cylinder head cooling fins
c fan blower fins
5 Clean the oil cooler of debris and foreign
material.
Part No. 826364
c
S-40 • S-45 • S-40 TRAX • S-45 TRAX
Section 3 • Scheduled Maintenance Procedures
CHECKLIST B PROCEDURES
Cooling and fan blower fins:
6 Inspect the fan blower fins for physical damage.
7 Clean the fan blower fins of debris and foreign
material.
8 Inspect the head cooling passages and fins for
physical damage or foreign material, using a
flashlight.
9 Clean the cylinder head cooling passages of
debris and foreign material.
10 Install the engine side cover.
11 Swing the engine back to its original position
and close the engine pivot plate latch.
12 Install the engine pivot plate safety pin.
3 - 21