Perform Engine Maintenance - Ford Models - Genie S-40 Service Manual

October 2014
5 Turn the key switch to platform controls.
6 At the platform controls, break the security tie
and lift the emergency power switch cover (if
equipped).
7 Press down the foot switch and simultaneously
hold the emergency power switch on and
activate each boom function.
Note: To conserve battery power, test each
function through a partial cycle.
Result: All boom functions operate.
8 Close the emergency power switch cover and
secure the cover with a security tie (if
equipped).
Part No. 826364
B-22
Perform Engine Maintenance -
Ford Models
Engine specifications require that this procedure be
performed every 400 hours.
Required maintenance procedures and additional
engine information are available in the
Ford MSG-425 EFI Operator Handbook
(Ford part number 1020010)
Ford MSG-425 EFI Operator Handbook
Genie part number
S-40 • S-45 • S-40 TRAX • S-45 TRAX
Section 3 • Scheduled Maintenance Procedures
CHECKLIST B PROCEDURES
• Engine oil - replace
• Oil filter - replace
• Spark plugs - clean/adjust/replace
• Loose or missing fasteners - tighten/replace
215322
3 - 35