Troubleshooting - Ricoh G108 Service Manual

6.14.4 TROUBLESHOOTING

Communication Status
You can check the communication status from the menu item "W.LAN Signal" in
the Maintenance menu. You can also use the Web Device Monitor or Telnet. The
status is described on a numbered scale of from 0 to 100.
Status Display
Good
Fair
Poor
Unavailable
NOTE: The communication status is checked only when the infrastructure mode is
used.
Channel Settings
If a communication error is caused by electrical noises or interference by other
electrical devices, you may have to change the channel settings.
To avoid interference with neighboring channels, it is recommended that you
change the channel by three. For example, if channel 11 (default) is currently used,
try using channel 8.
Channel 1 2
MHz 2,412
SM
Communication Status
76 ~ 100
41 ~ 75
21 ~ 40
0 ~ 20
25MHz
3 4 5 6 7
2,437
6-57
IEEE 802.11B (WIRELESS LAN)
25MHz
8 9 10 11 12
2,462
13
G108D967.WMF
G108