Ricoh G108 Service Manual page 134

SERVICE PROGRAM MODE
8441* T: PrtPGS/Ppr Size
P: PrtPGS/Ppr Size
8444*
8447* O: PrtPGS/Ppr Size
001 A3
002 A4
003 A5
004 B4
005 B5
006 DLT
• These counters do not distinguish between LEF and SEF.
8451* PrtPGS/Ppr Tray
001 Bypass
002 Tray 1
003 Tray 2
004 Tray 3
005 Tray 4
006 Tray 5
007 Tray 6
008 Tray 7
009 Tray 8
010 Tray 9
8461* T: PrtPGS/Ppr Type
8464* P: PrtPGS/Ppr Type
001 Normal
002 Recycled
003 Special
004 Thick
• These counters increase when the paper is output. On the other hand, the PM
counter increases (to measure the service life of each feed roller) when the
paper is fed.
• Blank sheets (covers, chapter covers, slip sheets) are also counted.
• During duplex printing, a sheet printed on two sides and a sheet printed on one
side are each counted as 1 sheet.
G108
The number of sheets of a specific paper size that the
application program uses
[0~9999999/ 0 / 1/step]
007
008
009
010
254
255
The number of sheets fed from a specific tray
[0~9999999/ 0 / 1/step]
Bypass Tray
Copier
Copier
Paper Tray Unit/LCT (Optional)
Paper Tray Unit (Optional)
(Not used)
(Not used)
(Not used)
(Not used)
(Not used)
The number of sheets of specific paper types
[0~9999999/ 0 / 1/step]
005
006
007
008
5-32
LG
LT
HLT
Full Bleed
Other (Standard)
Other (Custom)
Normal (Back)
Thick (Back)
OHP
Other
SM